| ¡@ | ¡@ | ¡@ | ¡@ | ¡@ | ¡@ | ¡@ | ¡@ | |||||||||
| ¡@ | ¡@ | ¡@ | ¡@ | ¡@ | ¡@ | ¡@ | ¡@ | ¡@ | ¡@ | ¡@ | ¡@ | ¡@ | ¡@ | |||
| Item | Test Item | Results | Remark | Comment | Design Margin | SCOPE SETTING | ³Æµù | ¡@ | ¡@ | |||||||
| B.W(MHZ) | Acq | Couple | ¡@ | ¡@ | ||||||||||||
| 1 | Visual Inspection | PASS | Visual Inspection | N.A | N.A | NA | NA | NA | ¡@ | ¡@ | ¡@ | |||||
| 2.1 | AC Input Requirement | Input Current RMS | PASS | Input RMS Current | 3.1.1 | N.A | 20 | HI-RES | NA | ¡@ | ¡@ | ¡@ | ||||
| 2.2 | Brown out/Brown out Recovery | PASS | Brown out | 3.1.4 | Bi=85Vac. Bo=65Vac | 20 | HI-RES | NA | ¡@ | ¡@ | ¡@ | |||||
| 3.0 | Input Over Current Protection | N/T | Input Over Current Protection | 3.1.1 | 95% | 20 | HI-RES | NA | ¡@ | ¡@ | ¡@ | |||||
| 4.0 | Inrush Current | PASS | Inrush Current | 3.1.5 | 95% | 20 | HI-RES | NA | ¡@ | ¡@ | ¡@ | |||||
| 5.0 | Efficiency | PASS | Efficiency | 3.1.6 / 3.2.4 | 1% Eff to 20%; 0.5% Eff to 50% and 100% | NA | NA | NA | ¡@ | ¡@ | ¡@ | |||||
| 7.0 | Stabdby Efficiency | PASS | Standby Eff, | 3.2.4 | <0.5W | NA | NA | NA | ¡@ | ¡@ | ¡@ | |||||
| 8.0 | Auto Restart | N/T | Auto Restart | 3.1.9 | N.A | 20 | HI-RES | DC | ¡@ | ¡@ | ¡@ | |||||
| 10.0 | Harmonic | PASS | Harmonic | 3.13 | N.A | NA | NA | NA | ¡@ | ¡@ | ¡@ | |||||
| 11.0 | Slow Line Transients (Surge) | PASS | Vin Surge | 3.1.8 | N.A | 20 | HI-RES | DC | ¡@ | ¡@ | ¡@ | |||||
| 12.0 | AC Dropout | PASS | AC Dropout | 3.1.7 | N.A | 20 | HI-RES | DC | ¡@ | ¡@ | ¡@ | |||||
| 13.0 | DC Voltage Regulation / DC Output Current | PASS | Regulation | 3.2.1/ 5.7 | +/- 5% for all output rails, beside -12V | NA | NA | NA | ¡@ | ¡@ | ¡@ | |||||
| 14.0 | No Load | PASS | No Load | 5.7 | N.A | 20 | HI-RES | DC | ¡@ | ¡@ | ¡@ | |||||
| 15.0 | Output Ripple and Noise | PASS | Ripple and Noise | 3.2.3 | 120mV for 12V and -12V rail; 50 mV for other rails | 20 | Envelope*10 | AC | ¡@ | ¡@ | ¡@ | |||||
| 16.0 | Output Transient Response(Dynamic Loading) | PASS | Dynamic | 3.2.5 | +/- 5% for all output rails, beside -12V | 20 | HI-RES | DC | ¡@ | ¡@ | ¡@ | |||||
| 17.0 | Close-Loop Stability | N/T | Close-Loop Stability | 3.2.7 | N.A | NA | NA | NA | ¡@ | ¡@ | ¡@ | |||||
| ¡@ | +5VDC / +3.3VDC Power / Sequencing | PASS | Tracking | 3.2.8 | 5V>3.3V at least 0.5V | 20 | HI-RES | DC | ¡@ | ¡@ | ¡@ | |||||
| 18.0 | Capacitive Loading | PASS | Capacitive Loading | 3.2.6 | N.A | 20 | HI-RES | DC | ¡@ | ¡@ | ¡@ | |||||
| 19.0 | Overshoot at Turn On/Off | PASS | Overshoot | 4.7 | <10% of regulation | 20 | HI-RES | DC | ¡@ | ¡@ | ¡@ | |||||
| 20.0 | Protection | Over Current Protection | PASS | OCP | 5.4 | N.A | 20 | HI-RES | DC | ¡@ | ¡@ | ¡@ | ||||
| 21.0 | Short Circuit Protection | PASS | SCP | 5.1 | N.A | 20 | HI-RES | DC | ¡@ | ¡@ | ¡@ | |||||
| 22.0 | Over Voltage Protection | PASS | OVP | 5.2 | N.A | 20 | HI-RES | DC | ¡@ | ¡@ | ¡@ | |||||
| 41.0 | Over Power Protection | PASS | OPP | 5.3 | N.A | 20 | HI-RES | DC | ¡@ | ¡@ | ¡@ | |||||
| 23.0 | Reset After Shutdown | PASS | Reset After Shutdown | 5.6 | N.A | 20 | HI-RES | DC | ¡@ | ¡@ | ¡@ | |||||
| 26.0 | Control and Logic Signals Ripple and Noise | PASS | POK@PS_ON RP | 4.1 /4.2 | N.A | 20 | HI-RES | AC | ¡@ | ¡@ | ¡@ | |||||
| 27.0 | Remote ON/OFF control | PASS | Remote ON@OFF control | 4.2 | N.A | 20 | HI-RES | NA | ¡@ | ¡@ | ¡@ | |||||
| 28.0 | Current Validation PS_ON | PASS | PS_ON Signal | 4.2 | N.A | 20 | HI-RES | DC | ¡@ | ¡@ | ¡@ | |||||
| 29.0 | POWER GOOD SIGNAL (POK, or P_GOOD) | PASS | Power Good Signal | 4.1 | N.A | NA | NA | NA | ¡@ | ¡@ | ¡@ | |||||
| 30.0 | Glitches | PASS | AC-On & AC-Off | 4.5 | N.A | 20 | HI-RES | DC | ¡@ | ¡@ | ¡@ | |||||